T-Rex Hot Rod Red Bed Liner, Urethane, SMR-1000R-K8 Truck Bedliner w/Spray Gun from Speedokote
Usually ships in 1-2 business days
Description of T-Rex Hot Rod Red Bed Liner, Urethane, SMR-1000R-K8 Truck...
We are delighted to stock the fantastic T-Rex Hot Rod Red Bed Liner, Urethane, SMR-1000R-K8 Truck Bedliner w/Spray Gun.
With so many available these days, it is great to have a brand you can trust. The T-Rex Hot Rod Red Bed Liner, Urethane, SMR-1000R-K8 Truck Bedliner w/Spray Gun is certainly that and will be a excellent buy.
For this reduced price, the T-Rex Hot Rod Red Bed Liner, Urethane, SMR-1000R-K8 Truck Bedliner w/Spray Gun is highly recommended and is a popular choice with many people. Speedokote have provided some great touches and this results in great value for money.
This auction is for 8 plastic quart bottles of Tint able Bed Liner (SMR-1000T), 26 ounces of Bright Red tint and two quarts of SMR-222 activator; which when mixed yields two gallons sprayable. Also included is a mixing cup for measuring activator and a free shutz spray gun to apply the bed liner. The SMR-1000R is a 1.7 lbs/gallon voc and is the only bed liner that is 50 state compliant. SMR-1000R is a true 2K urethane with outstanding adhesion to steel and sanded paint. This coating is formulated to withstand the same atmospheric conditions as a high quality single stage urethane topcoat. SURFACE PREPARATION: Surface should be cleaned of all grease, oil, dirt, rust, etc before sanding. Wash area with soap and warm water, then rinse and dry. Thoroughly clean area with Wax and Grease Remover. Scuff surface with 180-220 grit sandpaper. Re-clean with wax and grease remover, then dry with a clean towel. Instructions: Apply Bed Liner between 60 - 85 degrees F and humidity less than 70%, Not in direct sunlight. 1. Add 3 ounces of color and 8 ounces of SMR-222 activator to a quart bottle of SMR-1000T. 2. Screw on quart bottle cap and shake for two minutes. 3. Remove the cap and screw in the Shutz Spray Gun. 4. Adjusting the air pressure (60-80 PSI) and spray distance will change the texture. 5. Apply a uniform wet coat of bed liner using a sweeping motion. 6. After a 2 minute flash, apply a very light 2nd coat, sprayed at 80 PSI, using a fast sweeping motion. Specification: Usable Pot life at 70 degrees F / 20 degrees C : 60 minutes Touch Dry at 70 degrees F / 20 degrees C : 1 hour subject to film build. Light duty: 2 days at 70 degrees F / 20 degrees C. Regular duty: 5 days at 70 degrees F / 20 degrees C.
Hot Rod Bright Red durable bed liner 1.7 lbs/gallon voc
Protects against rust, corrosion salt, damp & extreme temperatures
Waterproof, flexible, helps deaden sound & vibrations
Apply with shutz gun at different pressures to obtain different textures
Provides excellent adhesion